A Guide to Lock Out Tag Out (LOTO) Safety Procedures

Factories always require high levels of protection and safety due to the presence of numerous machines that can cause major accidents if care is not taken, especially during maintenance.

Therefore, every factory owner is certainly familiar with lock out tag out, or has heard of LOTO safety, and is looking for more high-quality safety measures to ensure the safety of workers inside the factory at all times.

We are here to provide the necessary details you, as a factory owner, may need to ensure your safety and the safety of your employees, as well as to avoid legal accountability.

What Is the Main Principle of Lockout Tag Out?

The LOTO safety system aims to protect workers during maintenance. It isolates potential power sources during maintenance and prevents stored energy leaks or sudden start-ups during maintenance.

This protects maintenance workers and factories from any danger or injury during operation. LOTO is an abbreviation for Lockout-Tagout, which consists of two parts, each meaning the following:

• Lock Out: Using a special lock to isolate the power source.
• Tag Out: Hanging a warning card indicating that the machine is under maintenance and is prohibited from being operated.

The basic principle is to disconnect any machine from its power source to protect personnel from any potential hazards.

A lock out tag out must be available in every factory or any location with power-dependent machinery for protection during maintenance.

What Is the LOTO Procedure?

To safely implement the LOTO system, the LOTO procedure must be implemented to ensure complete safety. These steps are as follows:

• Notify employees and ensure that each worker is aware of the upcoming maintenance on the machines.
• Identify all power sources and their types to determine how best to isolate them to ensure safety.
• Turn off all machines and equipment to be serviced.
• Isolate power to all machines.
• Install a padlock and attach a tag, the lock prevents the machine from being operated, and the tag indicates that the machine is under maintenance and the name of the person responsible.
• Isolation confirmation ensures that the machine will not move or operate at all.
• Remove the lock and tag after completion. After maintenance is complete, the same worker who installed the lock will remove it and restart the machine safely.

What Is the ISO Standard for Lock Out Tag Out?

The international standard used for lock out tag out is ISO 45001 for occupational health and safety. LOTO Safety also uses ISO 14118 to prevent accidental restarting of machinery. The goal of these standards is to standardize procedures and ensure worker protection at all stages.

What Is the OSHA Standard for Lock Out Tag Out?

OSHA is the U.S. Occupational Safety and Health Administration. It regulates safety regulations in the workplace and sets forth standard No. 29 CFR 1910.14.

This standard explains when and how LOTO safety should be applied and the responsibilities of each worker. Organizations must also provide employee training and write clear policies for implementing the system to increase worker awareness and understanding of how to protect against hazards and avoid future risks during maintenance.

Padlock for a 10 QAR Product

First, let's understand what a Padlock is.

It's a high-quality security lock. It's not just any ordinary lock. It's made from non-conductive materials.

It has a place to attach a warning card, the key is unique and cannot be shared with another person, and it's not used for purposes other than safety isolation.

This is to increase security and avoid the dangers that can occur due to negligence or someone else taking over the task. It prohibits this, so only the person responsible for it can use it, eliminating the possibility of errors.

You can purchase a Padlock for 10 QAR from OKSouQ, which offers it at this price.